UJK T-TRACK & HOLD DOWN CLAMP - 915MM 717641
UJK T-TRACK & HOLD DOWN CLAMP - 915MM 717641
Embedded Files
Subscribe to our newsletter for weekly woodworking tool info, deals,wood working tips, and free wood working plans.
Hold down runs in T-Track for fast and easy positioning
75mm clamping reach
Clamp fitted with non-marring protective tips
UJK T-TRACK 915MM 502717
UJK T-TRACK 915MM 502717
Made of aluminium and anodised
Excellent accessory for jig making
915mm(36") lengths
In Stock €22.00
UJK T-SLOT BOLTS M6 X 75MM (PKT 10) 103412
UJK T-SLOT BOLTS M6 X 75MM (PKT 10) 103412
All-metric M6 or M8 threaded T-slot bolts
18 x 12mm head, direct fit into UJK T-Tracks
Fits into other similar sized 1/2" T-tracks
Other lenghts available.
In Stock € 12.00
UJK MITRE FENCE & T-SLOT TRACK 800MM 101766
UJK MITRE FENCE & T-SLOT TRACK 800MM 101766
Aluminium extrusion combines two tracks into one
Takes a mitre gauge with a 3/4" x 3/8" bar without a T-slot washer
T-track slot works with standard 1/4" hex head bolts and T-nuts
UJK MITRE SLOT TRACK 103565
UJK MITRE SLOT TRACK 103565
Anodised aluminium mitre slot track for durability
Add a mitre facility to custom router table etc.
Standard 19 x 9.5mm width of slot
The track is anodised aluminium for its durability. All it requires is a routed groove 31mm wide by 13mm deep. Alternatively, you can create laminated table using a base and 12.7mm (1/2" ) thick material on either side of the track. Securing the track in the groove is easy with pre-drilled, countersunk holes every 270mm.
The external measurements overall are 915mm(36") long, 31 x 12.7mm deep and the T-slot is 19 x 24 x 9.5mm deep. With its 19mm wide channel, the mitre slot track will work with any standard 19 x 9.5mm (3/4" x 3/8") mitre gauge bar with or without a T-facility. Supplied in 915mm lengths, the track is easily cut with a hacksaw to a different size if required.
UJK T-TRACK FOR TRACK & STOP KIT 101501
UJK T-TRACK FOR TRACK & STOP KIT 101501
Available individually far making an extended fence
610mm long with top and front T-slots
T-slots allow the option of using home-made jigs or fixtures
AXMINSTER WORKSHOP 148 PIECE JIG MAKING SET 950114
AXMINSTER WORKSHOP 148 PIECE JIG MAKING SET 950114
If you need to make up jigs for routing or sawing operations, then this is one potential kit for you. It contains a comprehensive selection of 1/4" UNC knobs and fittings, both male and female, which offers a wide range of jig making solutions. Kit contains 10 x 90mm tee bolts, 10 x 65mm tee bolts, 20 x 40mm tee bolts, 20 x 25mm tee bolts, 26 female knobs in various sizes, 10 male knobs with 25mm threaded rod, 20 x 16mm diameter washers with 6mm hole, 16 x screw in threaded inserts, 16 x spiked nut inserts. A sturdy case keeps everything together for convenience. N.B. All fittings are threaded 1/4" UNC.
We also sell a 6mm Metric Thread kit, item No. 103409
Key Features
All threads 1/4" UNC, both male and female
Great set that covers a huge variety of applications
Large selection of male and female threaded knobs and fittings
Tee bolt heads(12.8mm wide)
Supplied in a sturdy organiser case
UJK DOVETAILED T-TRACK 502712
UJK DOVETAILED T-TRACK 502712
UJK Dovetailed T-Track
Made of aluminium
Excellent accessory for jig making
A very useful section of aluminium T-Track which can be utilised for all manner of routing jigs, clamps and devices. The unique 14° dovetail shaped section makes the track extremely useful for jig making, especially if a clamping action is pulling against the track. The external measurements overall are 915mm(36") long, 23 x 9.5mm deep, the slot is 8.9 x 7mm deep and the T-section is 13.6mm wide. The UJK Dovetailed T-Track is 915mm (36") in length
UJK MITRE SLOT BAR 502714
UJK MITRE SLOT BAR 502714
UJK Mitre Slot Bar
Precision Bar for mounting jigs and accessories
Size: 457 x 19 x 9.5
Adjustable fit for your mitre slot
M6 x 1.0 or M6 x 1.0 Metric threaded holes for attaching jigs and accessories
AXMINSTER WORKSHOP 118 PIECE ALL METRIC JIG MAKING KIT 103409
AXMINSTER WORKSHOP 118 PIECE ALL METRIC JIG MAKING KIT 103409
All metric threads M6 for compatibility
26 x through thread female knobs in 4 styles
10 x male knobs in 2 styles
16 x pronged T-nuts
16 x threaded inserts
20 x 16mm O/D washers
30 x T-slot bolts, (10 each 25, 50 and 75mm)
Supplied in heavy duty organiser case
UJK TRACK & STOP KIT 101500
UJK TRACK & STOP KIT 101500
Turns a mitre saw into a precision cutting system
Repeatable cuts to an exact length time after time
For use with mitre saw, radial arm saw or a drill press
Kit comprises 2 x 610mm anodised aluminium sections of track
Left and right self adhesive scales
Flip-over stop and a production stop
UJK HOLD DOWN CLAMP 75MM
UJK HOLD DOWN CLAMP 75MM
Strong anodised aluminium
75mm long reach
M8 x 75mm tee-bolt fits UJK T-Track and standard mitre slot track
In Stock € 18.00
UJK BACKSTOP 105367
UJK BACKSTOP 105367
Use on any multifunction table with 20mm holes at 96mm centres
CNC machined from durable, HDF Valchromat
Useful stop or assembly aid
200mm long x 30mm wide x 20mm thick
3 dog holes allow straight or diagonal placement
All 20mm holes are chamfered
To order please call us on 99436536 or message us on facebook from below links.
Page updated
Google Sites
Report abuse